Accord Sedan V6-2.7L SOHC (24 Valve) (1996)
/Page-1012001.png)
Shift Control Solenoid Valve: Service and Repair
Shift Control Solenoid Valve A/B
1. Remove the mounting bolts and shift control solenoid valve assembly.
NOTE: Be sure to remove or replace the shift control solenoid valves A and B as an assembly.
2. Check the shift control solenoid valve fluid passages for dust or dirt, and replace as an assembly, if necessary.
3. Clean the mounting surface and fluid passages of the shift control solenoid valve assembly, and install a new shift control solenoid valve A/B with
a new filter/gasket.
4. Check the connector for rust, dirt or oil, then reconnect the connector securely.
