Accord Sedan V6-2.7L SOHC (24 Valve) (1996)
/Page-145002.png)
5. Disconnect the connector from the A/C thermostat.
Remove the four self-tapping screws, two mounting nuts and the mounting bolt.
Disconnect the drain hose, then remove the evaporator.
6. Pull out the A/C thermostat sensor from the evaporator fins.
7. Install in the reverse order of removal. Make note of the following items.
-
Install the A/C thermostat sensor to its original location.
-
If you're installing a new evaporator, add refrigerant oil (Sanden SP-10, Part No. 38899-P13-A01).
