honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Steering Wheel|Removal|Page 5970 > < Steering Wheel|Removal
Page 1
background image

Steering Wheel: Service and Repair
Installation

1. On models equipped with air bag, center the cable reel as follows:

a. Rotate cable reel clockwise until it stops.
b. Rotate cable reel counterclockwise (approximately two turns) until yellow gear tooth lines up with alignment mark on cover, or arrow mark on

cable reel label points straight up.

2. Install steering wheel on steering shaft in straight ahead position.

Fig. 1 Steering Wheel Installation. Models W/air Bag

3. On models equipped with air bag, ensure steering wheel shaft engages pins of cable reel, Fig. 1.

Steering Wheel|Removal|Page 5970 > < Steering Wheel|Removal