Accord Wagon EX L4-2156cc 2.2L SOHC (VTEC) MFI (1997)
Control Unit Input Test
1. Slide the driver's seat forward.
2. Disconnect the 18-P and 12-P connectors from the control unit.
3. Inspect the connector and socket terminals to be sure they are all making good contact.
^ If the terminals are bent, loose or corroded, repair them as necessary, and recheck the system.
^ If the terminals look OK, make the following input tests at the connector.
-
If a test indicates problem, find and correct the cause, then recheck the system.
-
If all the input tests OK, the control unit must be faulty, replace it.