Accord Wagon EX L4-2156cc 2.2L SOHC (VTEC) MFI (1997)
Rocker Arm Assembly: Service and Repair
Service Tips
NOTE:
^
Identify parts as they are removed to ensure reinstallation in original locations.
^
Inspect rocker shafts arms.
^
Rocker arms must be installed in the same position if reused.
^
When removing or installing the rocker arm assembly, do not remove the camshaft holder bolts. The bolts will keep the holders, springs and rocker
arms on the shaft.
^
When reassembling, fit the projection on the intake rocker shaft to the notch in the camshaft holder.
Prior to reassembling, clean all the parts in solvent, dry them and apply lubricant to any contact parts.