Accord Wagon EX L4-2156cc 2.2L SOHC (VTEC) MFI (1997)
Parking Lamp: Testing and Inspection
Combination Light Switch Test
1. Remove the dashboard lower cover and knee bolster.
2. Disconnect the 20-P connector from the main wire harness.
3. Inspect the connector terminals to be sure they are all making good contact.
^ If the terminals are bent, loose or corroded, repair them as necessary, and recheck the system.
^ If the terminals look OK, check for continuity between them in each switch position according to the table.
-
If there is no continuity between any of them, check for continuity in the switch harness.
-
If there is continuity in the switch harness, replace the combination light switch.
-
If there is no continuity in the switch harness, replace it.
Headlight/Dimmer/Passing Switch
Turn Signal Switch