Accord Wagon EX L4-2156cc 2.2L SOHC (VTEC) MFI (1997)
_mfi/Page-1567002.png)
NOTE: Make sure the boot is installed on the slave cylinder.
4. Bleed the clutch hydraulic system.
a. Attach a hose to the bleeder screw, and suspend the hose in a container of brake fluid.
b. Make sure there is an adequate supply of fluid at the clutch master cylinder, then slowly pump the clutch pedal until no more bubbles appear at
the bleeder hose.
c. Refill the clutch master cylinder with fluid when done.
d. Always use Genuine Honda DOT 3 Brake Fluid. Using a non-Honda brake fluid can cause corrosion and decrease the life of the system.
