Accord Wagon EX L4-2156cc 2.2L SOHC (VTEC) MFI (1997)
_mfi/Page-1631004.png)
1. Remove the ball bearing using the tool and press.
CAUTION: Remove the synchro hubs using a press and steel blocks as shown. Use of a jaw-type puller can cause damage to the gear teeth.
2. Support 5th gear on steel blocks, and press the mainshaft out of the 5th synchro hub, as shown.
3. In the same manner as above, support the 3rd gear on steel blocks, and press the mainshaft out of the 3rd/4th synchro hub, as shown.
MAINSHAFT ASSEMBLY INSPECTION
