Accord Wagon EX L4-2156cc 2.2L SOHC (VTEC) MFI (1997)
Master Switch Input Test
NOTE: The control unit is built into the power window master switch, and only controls driver's door window operations.
1. Remove the driver's door panel, and disconnect the 14-P and 1-P connectors from the master switch.
2. Inspect the connector and socket terminals to be sure they are all making good contact.
^ If the terminals are bent, loose or corroded, repair them as necessary, and recheck the system.
^ If the terminals look OK, make the following input tests at the connector.
-
If a test indicates a problem, find and correct the cause, then recheck the system.
-
If all the input tests prove OK, the power window master switch must be faulty; replace it.