Civic L4-1.3L Hybrid (2008)
Trunk / Liftgate Lock Cylinder: Service and Repair
Trunk Lid Lock Cylinder Replacement
1. Remove the trunk lid trim.
2. Disconnect the cylinder rod (A), and if equipped, disconnect the cylinder switch connector (B).
NOTE: Check for a damaged or stress-whitened rod fastener (C).
3. Remove the bolt securing the lock cylinder (A).
4. Remove the rear license trim.
5. Remove the bolt securing the lock cylinder (A).
6. Turn the lock cylinder (A) to release the hook (B) from the trunk lid (C), then remove the lock cylinder.
