Civic L4-1.3L Hybrid (2008)
Scuff Plate: Service and Repair
Trim Removal/Installation - Door Areas
Special Tools Required
KTC trim tool set SOJATP2014 *
* Available through the Honda Tool and Equipment Program.
Front Door Sill Area
NOTE:
-
Put on gloves to protect your hands.
-
Take care not to bend or scratch the trim and the panels.
-
Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
1. Driver's side: Remove the footrest.
2. Driver's side: Remove the front side cap from the front door sill trim, and remove the opener lock cylinder and screw.
3. Detach the hooks (A) and the tabs (B) from the kick panel (C) and the B-pillar lower trim (D), and pull the front door sill trim (E) up by hand to
detach the clips (F, G), then remove it.
