Civic L4-1.3L Hybrid (2008)
5. Pull back the edge of the seat-back cover (A) all the way around, release the clips (BK and release the hooks (C) of the horizontal wires (D) from
the vertical wires (E) on the pad, then remove the seat-back cover.
6. Install the cover in the reverse order of removal, and note these items:
-
To prevent wrinkles when installing a seat-back cover, make sure the material is stretched evenly over the pad before securing the clips.
-
Replace any clips (A) you removed with new ones. Install them with a commercially available upholstery ring pliers (B).