Civic L4-1.3L Hybrid (2008)
7. Remove the forward brake shoe (B) by removing the upper return spring (C), and disassemble the brake shoe assembly.
8. Remove the rearward brake shoe (D) by disconnecting the parking brake cable from the parking brake lever (E).
9. Remove the U-clip (A), and the wave washer (B), then separate the parking brake lever (C) from the brake shoe (D).
Reassembly
1. Apply rubber grease to the sliding surface of the pivot pin (A) on the parking brake lever (B).
2. Install the rearward brake shoe (C) and the wave washer (D) on the pivot pin, and secure with a new U-clip (E).
NOTE: Pinch the U-clip securely to prevent the parking brake lever from coming out of the brake shoe.
3. Connect the parking brake cable to the parking brake lever.
4. Apply a thin coat of rubber grease to the connecting rod ends (A), and the sliding surfaces (B) as shown. Wipe off any excess. Keep grease off the
brake linings.
