Civic L4-1.3L Hybrid (2008)
7. Disc brake type: Connect the brake hose to the caliper with the banjo bolt (C) and the new sealing washers (D).
8. Position the brake hose ends (A).
NOTE:
^
With clip type: Install the brake hose on the brake hose bracket (B) with a new brake hose clip (C).
^
Without clip type: Install the brake hose bracket (D) to the frame.
9. Connect the brake line (E) to the brake hose.
10. After installing the brake hose, bleed the normal brake system (except the servo unit and power unit).
11. Do the following check:
^
Check the brake hose and line joint for leaks, and tighten if necessary.
^
Check the brake hoses for interference and twisting.
12. Clean the mating surfaces of the brake disc or the brake drum and the inside of the wheel, then install the wheel.
