Civic L4-1.3L Hybrid (2008)
Brake Master Cylinder: Testing and Inspection
Master Cylinder Inspection
1. Inspect and note these items:
^
Before reassembling, check that all parts are free of dirt and other foreign particles.
^
Do not try to disassemble the master cylinder assembly. Replace the master cylinder assembly with a new part if necessary.
^
Do not allow dirt or foreign matter to contaminate the brake fluid.
2. If the suction hose (A) from the subreservoir (B) was removed, install the hose.
NOTE: Position the clamp (C) as shown.
3. If the reservoir tank hose was disconnected, install the reservoir tank (A) and the reservoir tank hose (B) to the subreservoir (C).
NOTE:
^
Align the "triangle" mark (D) on the reservoir tank and subreservoir with the paint mark (E) on the hose.
^
Position the clamps (F) as shown.