Civic L4-1.3L Hybrid (2008)
20. Remove the master cylinder mounting bolts (A), and separate the master cylinder (B) from the servo unit (C).
NOTE: Use a new O-ring (D) on reassembly.
21. Install the master cylinder and the servo unit in the reverse order of removal, and note these items:
^
Coat the new O-ring with the Shin-Etsu silicone grease (P/N 08798-9013).
^
Check the brake pedal height and free play, and adjust it if necessary.
22. Do the normal brake system bleeding (except servo unit and power unit). See: Brake Bleeding/Service and Repair
23. Do the servo unit and power unit system bleeding.
24. Spin the wheels to check for brake drag.
25. Do the sensor 0 (zero) position memorization. See: Brake Pedal Assy/Service and Repair/Memorizing 0 (Zero) Position