Civic L4-1.3L Hybrid (2008)
14. Move the exhaust 2nd rocker arm (A) for the No. 1 cylinder. The exhaust 2nd rocker arm should move independently of the exhaust 1st rocker arm
(B).
^
If the exhaust 2nd rocker arm moves independently, go to step 15.
^
If the exhaust 2nd rocker arm does not move independently, remove and disassemble the rocker arm assembly, and check that the rocker arm
pistons between the exhaust 1st and 2nd rocker arms move smoothly. If any rocker arm or rocker arm piston needs replacing, replace the
rocker arms for the cylinder as an assembly.
15. Tighten the valve on the air pressure regulator, then remove the VTEC air adapter.
16. Repeat step 4 to 15 on the remaining cylinder's rocker arms with each piston at TDC. When all the rocker arms pass the test, go to step 17.
17. Install the cylinder head cover.
