honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Rocker Arm Assembly > < Fuel Pressure Release|Service and Repair|Page 1932
Page 4
background image

-

Be careful not to damage the line (E) or other parts.

-

Do not use tools.

-

If the connector does not move, keep the retainer tabs pressed down, and alternately pull and push the connector until it comes off easily.

-

Do not remove the retainer from the line; once removed, the retainer must be replaced with a new one.

12. After disconnecting the quick-connect fitting, check it for dirt or damage.
13. Reconnect the negative cable to the battery.

NOTE:  If the IMA battery level indicator (BAT) on the gauge indicates zero level, start the engine, and hold it between 3,500 rpm and 4,000
rpm
 without load (in Park or neutral) until the IMA battery level indicator (BAT) indicates at least three segments.

14. Enter the anti-theft code for the audio system or the navigation system (if equipped), then enter the audio presets. Set the clock (on vehicles

without navigation).

Rocker Arm Assembly > < Fuel Pressure Release|Service and Repair|Page 1932