Civic L4-1.3L Hybrid (2008)
8. Set the torque wrench (D) on the pulley bolt.
9. Align the indicator (E) on the tensioner arm with the center mark (F) on the tensioner base by using the torque wrench, and measure the torque. If
the torque value is out of specification, replace the auto-tensioner.
NOTE: If the indicator exceeds the center mark, recheck the torque.
Auto-Tensioner Spring Torque:
10 - 13 Nm (1.0 - 1.3 kg-m, 7.3 - 9.4 lbf-ft).
