Civic L4-1.3L Hybrid (2008)
10. If the engine is still in the vehicle, do the following steps.
11. Install the front subframe.
12. Install the lower torque rod mounting bolts.
13. Remove the engine hanger and universal eyelet.
14. Connect the steering gearbox harness connectors.
15. Connect the suspension lower arm ball joints.
16. Install the under-floor three way catalytic converter (TWC).
17. Install the intake manifold stay and the harness clamp.
18. Install the A/C compressor, then connect the A/C compressor clutch connector.
19. Install the A/C condenser fan shroud assembly.
20. Install the engine undercover and the splash shield.
21. Install the front wheels.
22. Install the steering joint bolt.
23. After assembly, wait at least 30 minutes before filling the engine oil.
24. Check the wheel alignment.
