Civic L4-1.3L Hybrid (2008)
9. Turn the cam chain tensioner clockwise to compress the cam chain tensioner slider. Install the remaining bolt, then tighten the two bolts.
10. Check the chain case oil seal for damage. If the oil seal is damaged, replace the chain case oil seal.
11. Remove any old liquid gasket from the chain case mating surfaces, bolts, and bolt holes.
12. Clean and dry the chain case mating surfaces.
13. Apply liquid gasket, P/N 08717-0004,08718-0001, 08718-0003, or 08718-0009, evenly to the cylinder head and engine block mating surface of
the chain case. Install the component within 5 minutes of applying the liquid gasket.
NOTE:
^
Apply a 1.5 mm wide bead of liquid gasket along the broken lines (A).
^
Apply a 3.0 mm wide bead of liquid gasket to the engine block upper surface contact areas (B) on the chain case.
^
If you apply liquid gasket P/N 08718-0012, the component must be installed within 4 minutes.
^
If too much time has passed after applying the liquid gasket, remove the old liquid gasket and residue, then reapply new liquid gasket.
14. Install the crankshaft position (CKP) pulse plate (A) and the chain case (B).
NOTE:
^
Wait at least 30 minutes before filling the engine with oil.
^
Do not run the engine for at least 3 hours after installing the chain case.
