Civic L4-1.3L Hybrid (2008)
Blower Motor: Service and Repair
Blower Unit Removal/Installation
Blower Unit Removal/Installation
1. Remove the glove box.
2. Cut the plastic cross brace (A) in the glove box opening with diagonal cutters in the area shown, and discard it.
3. Remove the bolts and the glove box frame (A).
4. Remove the wire harness clip (A), the self-tapping screws, and the passenger's heater duct (B).
5. Disconnect the connector (A) from the blower motor. Remove the wire harness clip (B).
