honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Drive Motor Power Cable|Service and Repair|Page 2527 > < Drive Motor Power Cable|Service and Repair
Page 2
background image

9. Remove the motor power cables (B) and wrap them with insulating tape. Note the position of the U phase, V phase, and W phase cables before

you disconnect them.

10. Remove the air cleaner assembly.

11. Disconnect the motor power cable connector (A) from the motor stator (B).

NOTE:
-

Refer to Disconnecting the motor power cable

-

If the motor power cable terminals are wet, dry connector from the motor stator. them with a clean towel. Do not use compressed air.

12. Remove the wire (A) from the under-hood fuse/relay box, then remove the bolts (B).

13. Remove the cowl cover and the under-cowl panel.
14. Remove the cover (A), and disconnect the motor power cable connector (B).

Drive Motor Power Cable|Service and Repair|Page 2527 > < Drive Motor Power Cable|Service and Repair