Civic L4-1.3L Hybrid (2008)
IMA Battery Software Update Screen Examples:
REPLACING BCM/MCM HARDWARE AND UPDATING ITS SOFTWARE
If either the battery condition monitor (BCM) (2006-08 Civic Hybrid) or the motor control module (MCM) (2003-05 Civic Hybrid, 2005-07 Accord
Hybrid) are replaced or reprogrammed, their respective battery codes must be used to ensure that the latest IMA battery matching software is installed on
them to produce maximum IMA battery life.
NOTE:
The IMA battery software is stored in either the BCM or the MCM, depending on the model and year.
^
In 2006-08 Civic Hybrids, the BCM is a separate control unit and its part number starts with "1K100."
^
In 2003-05 Civic Hybrids and 2005-07 Accord Hybrids, the BCM is part of the MCM and its part number starts with "1K000."
^
The MCM is listed as a PDU in the Honda parts catalog.
CHECKING FOR AN IMA BATTERY/SOFTWARE MISMATCH DTC
After updating the IMA software, use the HDS to see if an IMA Battery/Software Mismatch DIG has been set. The 2003-05 Civic Hybrid and the
2005-07 Accord Hybrid may set IMA DIG P1569 if a new IMA battery type is installed and the old software is not updated.
If DTC P1569 is stored, check the IMA battery software that was installed and the IMA battery type for a possible mismatch before further
troubleshooting.
NOTE:
^
The 2006-08 Civic Hybrid does not set IMA DTC P1569 if there is a battery/software mismatch.
^
If DTCs U0301 or U0312 is stored, update the software according to the instructions in Service Bulletin 09-026, 2006-09 Civic Hybrid, 2010
Insight New DTCs U0301, U0302, and U0312.
