honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Diagram Information and Instructions|Page 8694 > < Diagram Information and Instructions|Page 8692
Page 1
background image

Map Light: Service and Repair

Front Individual Map Light Test/Replacement

With navigation

1. Turn the map light switch OFF.
2. Carefully pry the lens (A) off with a small screwdriver.

3. Remove the screws, then remove the map lights (B) and navigation microphone (C).
4. Disconnect the 3P connector from the map lights and the 10P connector from the navigation microphone.
5. Check for continuity between the terminals in each switch position according to the table.

6. If the continuity is not as specified, check the bulb(s). If the bulb(s) are OK, replace the light
7. Install in the reverse order of removal.

Without navigation

1. Turn the map light switch OFF.
2. Carefully pry the lens (A) off with a small screwdriver.

Diagram Information and Instructions|Page 8694 > < Diagram Information and Instructions|Page 8692