Civic L4-1.3L Hybrid (2008)
16. Disconnect the quick-connect fitting (A): Hold the connector (B) with one hand, and squeeze the retainer tabs (C) with the other hand to release
them from the locking tabs (D). Pull the connector off.
NOTE:
-
Be careful not to damage the line (E) or other parts.
-
Do not use tools.
-
If the connector does not move, keep the retainer tabs pressed down, and alternately pull and push the connector until it comes off easily.
-
Do not remove the retainer from the line; once removed, the retainer must be replaced with a new one.
17. After disconnecting the quick-connect fitting, check it for dirt or damage.
18. Reconnect the negative cable to the battery.
NOTE: If the IMA battery level indicator (BAT) on the gauge indicates zero level, start the engine, and hold it between 3,500 rpm and 4,000
rpm without load (in Park or neutral) until the IMA battery level indicator (BAT) indicates at least three segments.
19. Enter the anti-theft code for the audio system or the navigation system (if equipped), then enter the audio presets. Set the clock (on vehicles
without navigation).
Without the HDS ('07-08 models)
1. Make sure you have the anti-theft codes for the audio system or the navigation system (if equipped), then write down the audio presets.
2. Remove PGM-FI main relay 2 (A) from the auxiliary under-hood fuse/relay box.
