Civic L4-1.3L Hybrid (2008)
sensor ID to the TPMS control unit.
NOTE:
^
If the sensor IDs appear without the TPMS sensor tool button being pushed, a TPMS sensor is transmitting. Select the Exit button, wait 5
minutes for the sensors to go to sleep, then follow the on-screen prompts.
^
If the sensor does not respond (no sensor IDs are displayed), rotate the tire one-quarter turn and try again. If the TPMS sensor does not
respond after one full rotation of the tire, switch the tire to a known-good location and try again. If the TPMS sensor still does not respond
after one full rotation of the tire, replace the TPMS sensor.
22.
The sensor position check is complete. Using the DTC(s) and the information on the Sensor Position Check screen, locate the problem tire.
The following table and screen are examples only.
If the vehicle has DTC 22-1,this means that the problem is in tire 2 (sensor 2).
