Civic L4-1.3L Hybrid (2008)
23. Connect DLC terminal No. 7 to body ground with a jumper wire.
24. Check for continuity between body ground and these connector terminals:
Is there continuity between the DLC terminal and each of the terminals in the chart?
YES - Replace the part that does not communicate with the HDS.
NO - Repair open in the wire between the DLC (K-line) and the appropriate connector.
25. Do the gauge self-diagnostic function.
26. Check for B-CAN system DTCs without the HDS.
Is DTC B1168, B1169, and/or B1178 indicated?
YES - Go to step 39.
NO - Go to step 27.
27. Turn the ignition switch OFF.
28. Disconnect the HDS from the DLC.
29. Measure voltage between DLC terminal No. 16 and body ground.
Is there battery voltage?
YES - Go to step 30.
