honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Data Link Connector|Locations|Page 3206 > < Data Link Connector|Locations|Page 3204
Page 9
background image

59. Check for continuity between floor harness C651 4P connector terminal No. 3 and body ground.

Is there continuity?

YES - Replace PGM-FI main relay 2. Also replace the No. 2 FUEL PUMP (15 A) fuse.

NO -
-

Check the fuel pump, and replace it if needed. Also replace the No. 2 FUEL PUMP (15 A) fuse.

-

Check the fuel unit subharness, and repair it if needed. Also replace the No. 2 FUEL PUMP (15 A) fuse.

60. Jump the SCS line with the HDS.
61. Disconnect PCM connectors A (44P) and C (44P).
62. Turn the ignition switch ON (II).
63. Measure voltage between PCM connector terminal C36 and body ground.

Is there battery voltage?

YES - Go to step 64.

NO - Repair open in the wire between the No. 2 FUEL PUMP (15 A) fuse and the PCM (C36)

64. Measure voltage between PCM connector terminal A6 and body ground.

Data Link Connector|Locations|Page 3206 > < Data Link Connector|Locations|Page 3204