Civic L4-1.3L Hybrid (2008)
Catalytic Converter: Service and Repair
Warm Up TWC
Warm Up TWC Removal/Installation
1. Remove the A/F sensor (Sensor 1).
2. Remove the chamber cover.
3. Remove the under-floor TWC.
4. Remove the secondary HO2S (Sensor 2).
5. Remove the right driveshaft, then remove the intermediate shaft.
6. Remove the WU-TWC (A) and the gasket (B).
7. Remove the WU-TWC cover.
8. Install the parts in the reverse order of removal with a new gasket.