honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Fuel Line Coupler|Service Precautions|Page 3945 > < Fuel Line Coupler|Service Precautions|Page 3943
Page 3
background image

5. To prevent damage and keep foreign matter out, cover the disconnected connector and line ends with plastic bags (A).

NOTE:  The retainer cannot be reused once it has been removed from the line. Replace the retainer when:
-

replacing the fuel rail.

-

replacing the fuel feed line.

-

replacing the fuel pump.

-

replacing the fuel filter.

-

replacing the fuel gauge sending unit.

-

replacing the fuel tank.

-

it has been removed from the line.

-

it is damaged.

Fuel Line/Quick-Connect Fitting Installation

NOTE:  Before you work on the fuel lines and fittings, read the "Fuel Line/Quick-Connect Fitting Precautions".

1. Check the contact area (A) of the line (B) for dirt or damage, and clean it if needed.

2. Insert a new retainer (A) into the connector (B) if the retainer is damaged, or after:

-

replacing the fuel rail.

-

replacing the fuel feed line.

Fuel Line Coupler|Service Precautions|Page 3945 > < Fuel Line Coupler|Service Precautions|Page 3943