Civic L4-1.3L Hybrid (2008)
7. Gently contact the pin probe (male) at the terminal test port from the terminal side. Do not force the tips into the terminals.
NOTE:
-
For accurate results, always use the pin probe (male).
-
To prevent damage to the connector terminals, do not insert test equipment probes, paper clips, or other substitutes as they can damage the
terminals. Damaged terminals cause a poor connection and an incorrect measurement.
-
Do not puncture the insulation on a wire. Punctures can cause poor or intermittent electrical connections.
PCM Inputs And Outputs At Connector A (44P) Part 1