Civic L4-1.3L Hybrid (2008)
Ignition Switch: Service and Repair
Replacement
SRS components are located in the area. Review the SRS component locations, and precautions and procedures before performing repairs or servicing.
1. Make sure you have the anti-theft codes for the audio system or the navigation system (if equipped), then write down the audio presets. Make sure
the ignition switch is to LOCK (0).
2. Disconnect the negative battery cable.
3. Remove the driver's dashboard lower cover, and the steering column covers.
4. Disconnect the 7P connector (A) from the ignition switch (B).
5. Remove the two screws and the ignition switch.
6. Install in the reverse order of removal.
7. After reconnecting the battery, enter the anti-theft codes for the audio system or the navigation system (if equipped), then enter the audio presets.
Set the clock (on vehicles without navigation).