Civic L4-1.3L Hybrid (2008)
Clutch Control Solenoid Valve: Service and Repair
CVT Start Clutch Pressure Control Valve Replacement
1. Remove the lower valve body.
2. Disconnect the CVT start clutch pressure control valve connector (A).
3. Remove the CVT start clutch pressure control valve (B).
4. Check that the filter (C) is in good condition, replace it if it is clogged or damaged.
5. Install a new CVT start clutch pressure control valve with the dowel pins (D) and the separator plate (E) on the lower valve body (F).
6. Connect the CVT start clutch pressure control valve connector.
7. Install the lower valve body.