Civic L4-1.3L Hybrid (2008)
Pressure Regulating Solenoid: Service and Repair
CVT Driven Pulley Pressure Control Valve Replacement
CVT Driven Pulley Pressure Control Valve Replacement
1. Remove the lower valve body.
2. Disconnect the CVT driven pulley pressure control valve connector (A) and the inhibitor solenoid connector (B).
3. Remove the CVT driven pulley pressure control valve (C), and remove the inhibitor solenoid (D) from the CVT driven pulley pressure control
valve.
4. Check that the filter (E) is in good condition, replace it if it is clogged or damaged.
5. Replace the 0-rings (F) on the inhibitor solenoid, if necessary.
6. Install the inhibitor solenoid on a new CVT driven pulley pressure control valve.
7. Install a new CVT driven pulley pressure control valve with the dowel pins (G) and the separator plate (H) on the lower valve body (I).
8. Connect the CVT driven pulley pressure control valve connector and the inhibitor solenoid connector.
9. Install the lower valve body.
