Civic L4-1.3L Hybrid (2008)
7. Repeat step 6 for each wheel until all four sensor IDs are memorized. When all four IDs are memorized, the low tire pressure indicator blinks.
8. Turn the ignition switch to LOCK (0).
9. Disconnect the HDS from the DLC.
10. Test-drive the vehicle at 28 mph (45 km/h) or more for at least 1 minute.
11. Make sure the low tire pressure indicator does not blink.
12. Turn the ignition switch to LOCK (0).
13. Reduce the pressure in one tire until it is less than the appropriate specification.
14. Turn the ignition switch to ON (II).
15. Test-drive the vehicle at 28 mph (45 km/h) or more for at least 1 minute.
16. Make sure the low tire pressure indicator turns on, then inflate the tire back to specifications.
17. Repeat step 12 to 16 for all the other tires.
18. Clear any DTCs with the HDS.
