Civic L4-1.3L Hybrid (2008)
Starter Motor: Testing and Inspection
Starter Performance Test
1. Disconnect the BLK/WHT harness connector from the S terminal.
2. Make a connection for this test using the thickest (gauge) wire possible (preferably the same gauge as used on the vehicle).
NOTE: To avoid damaging the starter, never leave the battery connected for more than 5 seconds.
3. Connect the battery as shown. If the starter pinion moves out, it is working properly.
4. Disconnect the battery from the starter as shown. If the pinion retracts immediately, it is working properly.
5. Remove the starter.
6. Clamp the starter securely in a vise.
7. Connect the starter to the battery as shown, and confirm that the motor runs and keeps rotating.
8. If the electric current meets the specification when the battery voltage is at 11.5 V, the starter is working properly.
Specification
Electric Current: 80 A or less
