Civic L4-1.3L Hybrid (2008)
1. Raise the front of the vehicle, and support it with safety stands in the proper locations.
2. Remove the center cap (A), the wheel nuts (B) and the front wheel.
3. Remove the brake hose mounting bolt (A) from the damper.
4. Remove the brake caliper bracket mounting bolts (B), then remove the caliper assembly (C) from the knuckle. To prevent damage to the caliper
assembly or the brake hose, use a short piece of wire to hang the caliper assembly from the undercarriage. Do not twist the brake hose excessively.
5. Remove the wheel speed sensor (A) from the knuckle (B). Do not disconnect the wheel speed sensor connector.
6. Raise the stake (A), then remove the spindle nut (B).
