honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Steering|Tie Rod > < Steering Wheel Removal|Page 6305
Page 2
background image

NOTE: If the IMA battery level gauge (BAT) displays no segments, start the engine, and hold it between 3,500 rpm and 4,000 rpm without load
(in Park or neutral) until the BAT displays at least three segments.

^

Turn the ignition switch to ON (II); the SRS indicator should come on for about 6 seconds and then go off.

^

Enter the anti-theft code for the audio or the navigation system (if equipped), then enter the audio presets.

^

Set the clock (on vehicles without navigation).

^

Check the horn and turn signal switches work properly.

^

Make sure the steering wheel switches work properly.

Steering|Tie Rod > < Steering Wheel Removal|Page 6305