Civic L4-1.3L Hybrid (2008)
6. Install the stabilizer link on the trailing arm with the new flange nut, and lightly tighten it.
7. Raise the rear suspension with a floor jack to load the vehicle weight.
8. Tighten all mounting hardware to the specified torque values. For stabilizer link torque specifications.
9. Install the wheel speed sensor (A) and the brake hose mounting bracket (B) to the knuckle (C).
NOTE: Apply multipurpose grease to the mating surfaces on the knuckle and the 0-ring (D) during reassembly.
10. Clean the mating surfaces of the brake drum and the inside of the wheel, then install the rear wheel.
11. Check the wheel alignment, adjust it if necessary.
