Civic L4-1.3L Hybrid (2008)
Installation
1. Clamp the new damper housing, front wheelhouse, front damper extension, front bulkhead, and measure the front compartment diagonally.
2. Check the body dimensions.
-
Engine compartment.
-
Engine/transmission mount positions.
-
Front damper extension position.
-
Repair chart top view.
-
Repair chart side view.
3. Tack weld the new parts and front bulkhead into position.
4. Temporarily install the front subframe, and check the front side frame position.
5. Temporarily install the hood, front fender, headlight, and front bumper, then check for differences in level and clearance. Make sure the body lines
flow smoothly.
6. Do the main welding.
-
Weld the damper housing (A), front wheelhouse (B), front damper extension A (C) and front damper extension B (D).
-
From the passenger's side, plug weld the holes in the dashboard lower (E) and damper housing extension (F).
