Civic L4-1.3L Hybrid (2008)
5. Wash the knuckle and the hub thoroughly in high flash point solvent before reassembly.
6. Press a new wheel bearing (A) into the knuckle (B) using the old bearing (C), a steel plate (D), the attachment, the support base and a press.
NOTE:
^
Install the wheel bearing with the wheel speed sensor magnetic encoder (E) (brown color), toward the inside of the knuckle.
^
Remove any oil, grease, dust, metal debris, and other foreign material from the encoder surface.
^
Keep all magnetic tools away from the encoder surface.
^
Be careful not to damage the encoder surface when you insert the wheel bearing.
7. Install the snap ring (A) securely in the knuckle (B).
8. Install the splash guard (C), and tighten the screws (D) to the specified torque value.
9. Install the hub (A) onto the knuckle (B) using the attachment, the driver, the support base, and a hydraulic press. Be careful not to distort the
splash guard (C).
