Civic L4-1.3L Hybrid (2008)
TOOL DESCRIPTION
CLEANING PROCEDURE
The cleaning procedure involves hot fluid under high pressure. Check the security of all hoses and connections. Always wear safety glasses or a face
shield, gloves, and protective clothing. If you get ATF in your eyes or on your skin, rinse with water immediately.
Improper use of the ATF cooler cleaner can result in burns and other serious injuries.
Always wear eye protection and protective clothing, and follow all instructions in this bulletin.
1.
Plug the ATF cooler cleaner into a 110 V grounded electrical outlet.
NOTICE
Make sure the outlet has no other appliances (light fixtures, drop lights, extension cords) plugged into it. Also, never plug the cooler cleaner
into an extension cord or drop light cord; you would damage the unit.
2.
Flip the HEAT toggle switch to ON. Wait 1 hour for the cooler cleaner to reach its operating temperature. (The cooler cleaner is ready to use when
the temperature gauge reads 140° to 150°F.)
