Civic L4-1.3L Hybrid (2008)
Pressure Regulating Solenoid: Service and Repair
CVT Drive Pulley Pressure Control Valve Replacement
CVT Drive Pulley Pressure Control Valve Replacement
1. Remove the lower valve body.
2. Remove the solenoid harness clamp (A).
3. Disconnect the CVT drive pulley pressure control valve connector (B).
4. Remove the seven bolts, and remove the CVT drive pulley pressure control valve (C). The CVT start clutch pressure control valve (D) can also be
removed.
5. Check that the filters (E) are in good condition, replace it if it is clogged or damaged.
6. Install a new CVT drive pulley pressure control valve with the dowel pins (F) and the separator plate (G), and the CVT start clutch pressure
control valve with the dowel pins (H) and the separator plate (I) on the lower valve body (J).
7. Connect the CVT drive pulley pressure control valve connector.
8. Install the solenoid harness clamp.
9. Install the lower valve body.
