Civic L4-1.3L Hybrid (2008)
Shift Interlock: Service and Repair
Shift Lock Stop, Shift Lock Stop Cushion Replacement
Shift Lock Stop, Shift Lock Stop Cushion Replacement
1. Remove the shift lever assembly.
2. Release the shift lock solenoid lock (A), then remove the shift lock solenoid (B).
3. Remove the shift lock release (A) and the release spring (B).
4. Remove the shift lock stop (C) and the stop cushion (D), and replace the shift lock stop or the stop cushion.
5. Install the shift lock stop cushion on the shift lock stop.
6. Apply silicone grease to the pin on the shift lever bracket base, and install the shift lock stop over the pin.
7. Install the shift lock release spring and the shift lock release, apply silicone grease to the shift lock release mounting tip if necessary.
8. Apply silicone grease to the tip of the shift lock stop, and install the shift lock solenoid assembly by aligning the joint of the shift lock solenoid
plunger with the tip of the shift lock stop.
9. Route the shift lock solenoid harness in the guide.
10. Install the shift lever assembly.
