Civic L4-1.3L Hybrid (2008)
11. Close the ear portion (A) of the band with commercially available boot band pliers Kent-Moore J-35910 or equivalent (B).
12. Check the clearance between the closed ear portion of the band. If the clearance is not within the standard, close the ear portion of the band tighter.
13. Repeat steps 11 and 12 for the band on the other end of the boot.
Intermediate Shaft Disassembly
Intermediate Shaft Disassembly
Special Tools Required
^
Support base attachment 07JAF-SH20400
^
Oil seal driver 07947-SB00100
^
Support base 07965-SD90100
1. Remove the three flange bolts, then remove the heat shield (A).
