Civic L4-1.3L Hybrid (2008)
Office. You must request consideration, and get a decision, before starting work.
REPAIR PROCEDURE
1. Remove the appropriate front inner door panel:
^
Refer to page 20-12 of the 2006-2009 Civic Service Manual or page 20-7 of the 2006-2009 Civic Hybrid Service Manual, or
^
Online, enter keywords PANEL REM, then select Front Door Panel Removal/Installation (4-door) from the list.
2. Remove the door glass:
^ Refer to page 20-19 of the 2006-2009 Civic Service Manual or page 20-14 of the 2006-2009 Civic Hybrid Service Manual, or
^
Online, enter keywords DOOR GLASS, then select Front Door Glass and Regulator Replacement from the list.
3. Replace the glass run channel. Lightly coat the inside of the glass run channel with Shin Etsu silicone grease.
4. Replace the window regulator and the door glass with new parts:
^ Refer to page 20-19 of the 2006-2009 Civic Service Manual or page 20-14 of the 2006-2009 Civic Hybrid Service Manual, or
^
Online, enter keywords DOOR GLASS, then select Front Door Glass and Regulator Replacement from the list.
5. Adjust the window to make sure the glass is pushed to the back of the door, then tighten the glass mounting bolts:
^
Refer to page 20-35 of the 2006-2009 Civic Service Manual or page 20-28 of the 2006-2009 Civic Hybrid Service Manual, or
^
Online, enter keywords GLASS ADJUST, then select Glass Adjustment from the list.
6. Reassemble the remaining parts in the reverse order of removal.
7. Do the power window control unit reset procedure:
^
Refer to page 22-255 of the 2006-2009 Civic Service Manual or page 22-193 of the 2006-2009 Civic Hybrid Service Manual, or
^
Online, enter keyword RESET, then select Power Window Control Unit Reset from the list.
