Civic L4-1.7L CNG (2003)
YES - Go to step 6.
NO - Repair open in the wire between the injector and the injector control module.
6. Disconnect PCM connector A (31P) and E (31P).
7. Check for continuity between body ground and PCM connector terminal (see table).
Is there continuity?
YES - Repair short in the wire between the injector control module and PCM.
NO - Go to step 8.
8. Connect the injector control module 26P connector terminals No.8, No.9, No.10, No.11 and No.24 to body ground with a jumper wire (see table).