honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Clockspring Assembly / Spiral Cable, Air Bag > < Air Bag Safety Switch/Connector|Service and Repair
Page 2
background image

1. To reconnect, hold the pawl-side connector half, and press on the back of the sleeve-side connector half in the direction shown. As the two

connector halves are pressed together, the sleeve (A) is pushed back by the pawl (C). Do not touch the sleeve.

2. When the connector halves are completely connected, the pawl is released, and the spring- loaded sleeve locks the connector.

Side Airbag Connector:

Disconnecting

To release the lock, pull the spring-loaded sleeve (A) and the slider (B) while holding the opposite half of the connector. Then pull the connector halves
apart. Be sure to pull on the sleeve and not on the connector half.

Connecting

Hold both connector halves, and press them firmly together until the projection (C) of the sleeve-side connector clicks.

Clockspring Assembly / Spiral Cable, Air Bag > < Air Bag Safety Switch/Connector|Service and Repair