honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Interior Moulding / Trim|Service and Repair|Page 7860 > < Interior Moulding / Trim|Service and Repair|Page 7858
Page 4
background image

4. Remove the bolts (A, B), and detach the connector clip (C), then remove the center pipe extension (D).

5. Remove the rear heater joint duct (A).
6. Disconnect the parking brake cables from the equalizer.

7. Remove the floor mat holders (A) from the driver's side.

Interior Moulding / Trim|Service and Repair|Page 7860 > < Interior Moulding / Trim|Service and Repair|Page 7858